9 Best T8 Led Tube Light 150lm W of 2026 To Cut Electric Bills

1

ONLYLUX 8 Foot Led Lights, 5850LM,Ballast Bypass,6000k Clear Cover(12 Pack)

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.3
• Brand
  ONLYLUX

Key specs2

Wiring configuration

Requires direct ballast bypass installation, so the existing fluorescent ballast must be disconnected or removed from the fixture.

Fixture length

8-foot commercial tube

Pros & cons32

Pros

• Delivers 5850 lumens of bright 6000K daylight illumination across large 8-foot commercial fixtures
• Direct ballast bypass wiring eliminates ongoing fluorescent ballast maintenance and failure points
• Clear cover allows maximum raw light output across open warehouse or garage ceilings

Cons

• Requires rewiring the fixture to bypass the existing ballast before operation
• Wattage is unlisted in the title, requiring confirmation to calculate exact lumens-per-watt efficiency

2

LUXRITE 4FT LED Tube Light, T8, 12W/15W/18W, 5CCT 3000K-6500K (4

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.5
• Brand
  LUXRITE

Key specs2

Color temperature options

5 selectable CCT levels (3000K to 6500K)

Power selection

Adjustable 12W, 15W, or 18W wattage draw

Pros & cons32

Pros

• Selectable wattage settings between 12W, 15W, and 18W let you dial in power consumption
• Offers 5 selectable color temperatures spanning warm 3000K to daylight 6500K on one tube
• Standard 4-foot T8 form factor fits common residential and workshop troffers

Cons

• Total lumen ratings for each wattage setting are unlisted and require verification
• Type A plug-and-play versus Type B bypass wiring compatibility is not specified in the listing

3

JESLED 4FT LED T8 Type A+B Tube Lights, 24W(65W Equivalent),

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.6
• Brand
  JESLED

Key specs2

Ballast compatibility

Supports both ballast plug-and-play (Type A) and ballast bypass rewiring (Type B) for flexible installation.

Power wiring flexibility

Single or double end powered support

Pros & cons32

Pros

• Type A+B hybrid design allows instant plug-and-play with compatible ballasts or direct ballast bypass
• Works with either single-ended or double-ended power wiring configurations
• Produces 3200 lumens at 6000K daylight to replace 65W fluorescent T8, T10, or T12 tubes

Cons

• Calculated efficacy of roughly 133 lm/W falls short of the 150 lm/W high-efficiency benchmark
• Clear lens may cause noticeable glare in fixtures without diffusers

4

ELEKICO 8FT LED Bulbs, 5000K 75W 9500LM 8FT Led Shop

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  7.9
• Brand
  ELEKICO

Key specs2

Socket base type

FA8 single pin base

Optical profile

V-shaped design with a clear cover spreads 9500 lumens over a wide angle in high-ceiling fixtures.

Pros & cons32

Pros

• High light output of 9500 lumens brightly lights up tall warehouse and commercial ceilings
• V-shaped tube profile with clear cover casts broad light distribution across workspace floors
• Standard FA8 single-pin base directly replaces traditional 8-foot T8, T10, and T12 fluorescent bulbs

Cons

• Calculated efficacy of around 126 lm/W draws 75W per tube, trailing higher efficiency options
• Bypass wiring type and single- or double-ended power requirements must be verified before install

5

JESLED 4FT LED T8 Type A+B Tube Lights, 28W(80W Equivalent),

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.2
• Brand
  JESLED

Key specs2

Luminous efficacy

145 lumens per watt (4060LM at 28W)

Wiring options

Functions as a Type A plug-and-play tube or a Type B ballast bypass replacement with single or double-end wiring.

Pros & cons32

Pros

• Delivers 4060 lumens on a 28W draw, achieving a high efficiency of 145 lumens per watt
• Hybrid Type A+B functionality supports direct ballast bypass or plug-and-play operation
• Directly replaces higher-wattage 80W fluorescent tubes with bright 6500K daylight output

Cons

• Draws 28W per tube, which is higher than lower-wattage 14W or 18W alternatives
• Listing does not specify lens finish, requiring verification if frosted diffusion is needed

6

ONLYLUX T8 Led Bulbs 4 Foot 6500K 36W 5400LM, Super

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.3
• Brand
  ONLYLUX

Key specs2

Efficiency rating

150 lumens per watt (5400LM at 36W)

Installation method

Ballast bypass design requires direct line-voltage connection, removing ballast failure points.

Pros & cons32

Pros

• Hits the benchmark efficiency target with 150 lumens per watt from 5400 lumens at 36W
• Intense 5400-lumen output provides bright 6500K daylight suitable for workshops and warehouses
• Ballast bypass wiring prevents energy loss and eliminates future ballast replacements

Cons

• Requires opening the fixture to rewire around the existing fluorescent ballast
• High 36W draw per tube consumes more power per socket than standard 14W or 18W retrofit bulbs

7

JESLED 20-Pack T8 LED Tube Lights 4Ft, 14W 2450LM 5000K,

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.6
• Brand
  JESLED

Key specs2

Energy efficiency

175 lumens per watt (2450LM at 14W)

Lens finish

Frosted anti-glare cover

Pros & cons32

Pros

• Delivers exceptional efficacy of 175 lumens per watt with 2450 lumens on just 14W of power
• Type A+B dual mode allows quick ballast plug-and-play or direct single/double-ended bypass wiring
• Frosted lens diffuses 5000K daylight evenly to eliminate harsh diode glare in offices and shops

Cons

• 2450 lumens per tube provides lower absolute output than high-wattage 4000-plus lumen tubes
• Ballast compatibility list must be checked if choosing plug-and-play operation without rewiring

8

JESLED 16 Pack 4FT T8 LED Bulbs,18W 2400LM 5000K Led

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  9.2
• Brand
  JESLED

Key specs2

Safety listing

ETL listed

Retrofit flexibility

Hybrid Type A+B operation allows plug-and-play replacement now and ballast bypass rewiring later if the ballast dies.

Pros & cons32

Pros

• ETL listed certification verifies compliance with North American electrical safety standards
• Hybrid Type A+B design works with existing ballasts or direct single/double-ended bypass wiring
• Draws an economical 18W while producing 2400 lumens of neutral 5000K daylight illumination

Cons

• Efficacy of roughly 133 lm/W falls below higher 150-plus lm/W tube options
• Lens finish is unstated in the listing and should be verified for glare-sensitive areas

9

lvsdak T8 Led Bulbs 4 Foot, 5000K 45W 5850LM 24-Pack

View on Amazon

• LFR Score

  LFR Score is a ranking system developed by lightfansreviews.com. LFR Score has no relationship or impact from any manufacturers or sales agent websites. Learn more

  8.6
• Brand
  lvsdak

Key specs2

Light output per tube

5850 lumens (5000K daylight)

Wiring requirements

Driver wiring type is unlisted and must be confirmed to ensure compatibility with your fixture setup.

Pros & cons32

Pros

• Produces 5850 lumens per 4-foot tube to flood dark work areas with crisp 5000K illumination
• Replaces standard fluorescent tubes with significantly higher overall light output
• Supplied in a bulk 24-pack ideal for outfitting large multi-fixture shop or garage layouts

Cons

• Efficacy of 130 lm/W requires a substantial 45W draw, using more electricity than efficient models
• Listing does not specify Type A plug-and-play or Type B bypass, so wiring type must be confirmed

Last update on 2026-10-19 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API

How do you verify if a T8 LED tube delivers true high luminous efficacy?

Check the manufacturer listed lumen output directly against the rated wattage draw. Some replacement bulbs produce high brightness simply by consuming high wattage, such as the lvsdak 4-foot tube drawing 45W for 5850LM. In comparison, high-efficiency options like the ONLYLUX 4-foot bulb deliver 5400LM at 36W, which cuts electric bills while keeping warehouses and garages brightly lit.

Do you have to remove the existing ballast to install T8 LED tubes?

It depends on whether the tube is built for ballast bypass or hybrid Type A+B operation. Ballast bypass models, such as the ONLYLUX 8-foot light, require rewiring the fixture to route line voltage directly to the sockets. Hybrid Type A+B models like the JESLED 24W 3200LM tube allow plug and play operation with a compatible existing ballast, but they also support ballast bypass wiring if the old ballast fails.

What is the difference between single-ended and double-ended wiring?

Single-ended wiring supplies both live and neutral power to one end of the tube, while double-ended wiring connects line voltage to one end and neutral to the other. Several Type A+B tubes, such as the JESLED 14W 2450LM and 18W 2400LM models, support single or double end powered wiring. Always check your fixture sockets and verify whether you have shunted or non-shunted tombstones before completing the bypass.

Will an 8-foot LED tube fit into a standard 4-foot fluorescent shop fixture?

No, 8-foot LED tubes require dedicated 8-foot housings and different socket connections. Tubes such as the ELEKICO 8FT 75W 9500LM bulb use an FA8 single pin base, whereas standard 4-foot tubes use bi-pin connections. Confirm the exact physical length and socket style inside your existing fixture before ordering replacements.

Can T8 LED tubes replace older T10 and T12 fluorescent bulbs?

Yes, many T8 LED tubes are engineered to directly replace both T10 and T12 fluorescent lamps. Options like the JESLED 28W 4060LM tube and the ELEKICO 75W bulbs explicitly list compatibility as T8, T10, and T12 replacements. If you are upgrading secondary task lighting alongside overhead fixtures, setting up clean under-cabinet wiring ensures dependable workbench illumination across the rest of your workspace.

Which color temperature works best for commercial shops and garages?

Daylight and cool white color temperatures between 5000K and 6500K provide the clearest visibility for detailed shop work. Options like the ELEKICO 8FT and JESLED 14W tubes deliver clean 5000K daylight, while the ONLYLUX 4-foot tube provides crisp 6500K illumination. For spaces where lighting needs shift, fixtures using the LUXRITE 4FT tube offer 5CCT selectable tuning between 3000K and 6500K. If you are also adding accent strips near workbenches, learning how to install LED strip lights so they never fall helps keep supplementary runs firmly in place.